German Company Gives Users a Choice of Modular Pressure Controllers for Calibration

europascal (Germany) offers you 2 easy to use and maintenance-friendly solutions to calibrate a broad variety of pressure measurement devices and sensors. The modular configuration of the calibrators allows versatile and cost-effective solutions. 

The 6270A Modular pressure controller/calibrator offers: Wide measurement range from vacuum to 200 bar (3.000 psi) , Accuracy: 0.02% FS or 0.01% of reading.

The pressure modules PM600 work with the quartz reference pressure mdoule technology (Q-PRT) from Fluke Calibration. Thus, they offer a measurement uncertainty of 0.01% of reading from 30% to 100% of the modules’ measurement range. Modules for 14 measurement ranges are available upon request. Some of them are configured to work in absolute or gauge modus. 

ADT 780 pressure controller offers: Pressure ranges from vacuum to 200 bar, Exchangeable sensors, Accuracy of 0.005% of reading, +0,005% FS (Standard 0,02% of reading), Standalone operation to 70 and 200 bar, No gas bottles are necessary when the device is being used with the electrical pump and 
(at 200 bar) a gas pressure generator, Temperature compensation from 0 °C to 50 °C.

The 780 series pressure controllers offer the same resistance, accuracy and quality in a new desktop design with many easy to use functions and features. The modular setup of this device allows you to exchange the internal and external sensors with other intelligent pressure modules. Every device is equipped with an intelligent pressure module which is configured for the supported ranges. Additionally to the intelligent pressure modules, the Additel 708 series is equipped with a barometric sensor which allows to switch between gauge and absolute pressure. 

europascal will be at SENSOR+TEST 2016, Hall 5, Stand 5-309.