Indoor Air Quality CO2 Monitor is Fast and Easy to Use

The Geotech (UK) G150 carbon dioxide (CO2) analyser has the accuracy essential for Indoor Air Quality (IAQ) measurements in very low CO2 concentrations of 0-10,000ppm. This level of accuracy is vitally important when checking, for example, sick building syndrome. Newly designed and engineered, the G150 has options for oxygen (O2), temperature, humidity and PC/Internet hook up. Checking IAQ CO2 levels is simple. Users just switch on the G150 and view the crystal-clear screen. With backlight on its easy-to-read screen, the Geotech G150 is a replacement the earlier Geotech CD98 analyser. Geotech has developed the G150 from 30-years of experience and customer-focused research.
 
Reliance on accurate indoor air quality (IAQ) monitoring is greater than ever for environmental site surveys on homes, offices and factories especially near potentially polluting sources like landfills. Border control and port inspectors may use the G150 carbon dioxide analyser with the Stowseek probe to discover stowaways and illegal immigrants in lorries and containers. Food packers with modified air packaging (MAP) and growers with controlled environments in e.g., glasshouses or for mushroom farming all seek accurate, reliable gas analysis.
 
At the heart of the G150, designed and built by Geotech in the UK is a custom, Geotech-designed, CO2 analysis cell. The G150 infrared absorption cell has increased length for low-levels CO2 to give maximum sensitivity and accuracy. It is specifically designed for 0-10,000ppm, (0.0-1.0 %). This accuracy is essential as IAQ tests measure very small concentrations of CO2. In normal fresh air CO2 ranges between 380-420ppm (0.038-0.042%) while concerns with sick building syndrome (SBS) start with CO2 as low as 500ppm (0.05%).
 
Options include oxygen (O2) analysis using a factory-fitted electrochemical cell with a service replacement life of three years in air. An optional probe measures humidity and temperature. The probe, with a carry-case assists, environmental site surveyors as they move between locations. The G150-11N measures CO2, O2 humidity and temperature.
 
With the G150 is the option of a unique ID for each location against which the G150 stores a set of readings of date, time, CO2, O2, temperature and humidity. In total the G150 stores 1000 data sets. These can be screen-viewed or, via PC-USB cable, downloaded to Geotech¹s optional Analyser Data Manager Software.  With this, users can also download calibration events and an analyser¹s set-up profiles to copy to another G150 readied for immediate use. PC connectivity also provides Internet access for remote, down-the-line diagnostics and firmware updates.
 
The G150 IAQ Co2 analyser is supplied with a battery recharger, carry case and user manual on CD. Options include an O2 sensor (0-100%), a humidity sensor (0-100%), a temperature probe and 1m long hollow metal ¹stowaway¹ probe for commercial vehicle storage areas. PC USB connector and Analyser Data Manager Software is an option. More: www.geotech.co.uk